In clustered system data communication runs on EMUS proprietary CAN communication protocol using a special product for efficient CAN traffic distribution called „CAN Filter“. CAN filter is filtering internal system‘s CAN traffic from external CAN traffic, thus making it stable and reliable.
EMUS G1 Control Unit (or simply Control Unit) is the main controller that autonomously executes all core and utility functions of battery management.
It connects to user’s PC via USB port and allows to make BMS system configuration via EMUS Control Panel.
EMUS G1 Control Unit is also equipped with a non isolated CAN interface. This interface is multipurpose, and enables the Control Unit to:
• Communicate with other CAN equipped EMUS G1 BMS components
• Control certain third-party charging devices
• Transmit BMS activity data (either periodically or by request)
• Receive new configuration parameter values and other special messages
EMUS support three types of current sensors: busbar dual range, closed loop hall effect and third party “Isabellenhütte” IVT series current sensors.
CAN Cell Group Modules (also known as CGMs) are advanced, microprocessor equipped cell communication galvanically isolated adapters that allow the Control Unit to communicate with the Cell Modules over the CAN bus instead of directly. Total 32 of them can be used in a single battery pack, which allows to connect the Cell Modules into several small daisy chains instead of one long chain.
In clustered system data communication runs on EMUS proprietary CAN communication protocol using a special product for efficient CAN traffic distribution called „CAN Filter“. CAN filter is filtering internal system‘s CAN traffic from external CAN traffic, thus making it stable and reliable.
EMUS G1 Control Unit (or simply Control Unit) is the main controller that autonomously executes all core and utility functions of battery management.
It connects to user’s PC via USB port and allows to make BMS system configuration via EMUS Control Panel.
EMUS G1 Control Unit is also equipped with a non isolated CAN interface. This interface is multipurpose, and enables the Control Unit to:
• Communicate with other CAN equipped EMUS G1 BMS components
• Control certain third-party charging devices
• Transmit BMS activity data (either periodically or by request)
• Receive new configuration parameter values and other special messages
EMUS support three types of current sensors: busbar dual range, closed loop hall effect and third party “Isabellenhütte” IVT series current sensors.
EMUS Centralized Cell Group Module (CCGM) is a battery cells communication adapter (or “Slave unit”) equipped with two CAN connectors for easy BMS system assembly and integrated proprietary EMUS software allows data transfer within 100ms frequency. It also have 5 external temperature sensors to monitor ambient temperature.
Each CCGM is capable to manage from 6 up to 16 lithium cells. Total 450V voltage can be achieved connecting CCGM units in series, and up to 25 units can be connected in parallel.
EMUS G1 Clustered BMS topology is used to build large Lithium-ion battery systems mostly in electric energy storage (EES) applications where high power, capacity, and modularity are required. Such BMS configuration not only allows to build large ESS system, but also provides redundancy features, for example, if one of the battery strings/subsystems runs out of operation, other battery strings can operate and provide power continuously. Up to 6MWh power energy storage systems can be built with off-the-shelf products and larger systems can be made with customized solutions.
EMUS G1 Clustered system is a combination of several commonly used EMUS G1 Distributed Grouped or Centralized CCGM subsystems. Simply said, up to 18 strings, with each string having its own G1 Control Unit can be interconnected into one large system. From all of the 18 Control Units, one of them is automatically designated as a „Master CU“ and the remaining Control units as „Slave CU“. In such a way „Master CU“ is gathering information from „Slave CU“ strings and commands operational logic, as well communicates with external devices such as chargers, inverters, VCU, PLC, etc. All system configuration is easily made on EMUS Control Panel, which is provided free of charge to EMUS customers.
This system runs on EMUS proprietary CAN communication protocol using a special item for efficient CAN traffic distribution called „CAN filter“. CAN filter is filtering internal system‘s CAN traffic from external CAN traffic, thus making it stable and reliable.
EMUS G1 Clustered system features:
• Wide scalability options for high voltage and capacity systems up to 6MWh*
• Redundancy feature
• Wide passive balancing ranges (400mA, 700mA, 1500mA, 3000mA, 6000mA)
• Operational logic customization with client‘s external devices
• Easy and fast installation
• CAN communication
* Higher power systems can be designed with customized solutions, please contact at sales@emusbms.com
G1 CAN Cell Group Module
Emus BMS Can Cell Group Modules are cell communication adapters for interfacing the main controller and separate parts of a battery pack, that enables Emus battery management system to serve large battery packs and systems of multiple cell strings connected in parallel.
G1 BMS Control Unit
EMUS BMS Unified Control Unit is the the main controller in Emus battery management system, that automatically controls the battery operation process utilizing various interfaces for measurement, control, data exchange, configuration and indication.
G1 CAN Filter
Emus BMS Can Cell Group Modules are cell communication adapters for interfacing the main controller and separate parts of a battery pack, that enables Emus battery management system to serve large battery packs and systems of multiple cell strings connected in parallel.
G1 Centralized CAN Cell Group Module
EMUS Centralized CAN Cell Group Modules (also known as CCGMs) are advanced cell communication adapters for interfacing main controller and a battery pack up to 16 Lithium cells
G1 High Voltage Centralized CAN Cell Group Module
EMUS Centralized CAN Cell Group Modules (also known as CCGMs) are advanced cell communication adapters for interfacing main controller and a battery pack up to 16 Lithium cells
G1 Bus Bar Dual Range Current Sensor
EMUS BMS Bus Bar Dual Range Current Sensor is a highly accurate hall-effect current measurement device, specifically designed to be used in EMUS battery management system.
G1 Loop Style Dual Range Current Sensor
EMUS BMS Loop style Dual Range Current Sensor is a highly accurate hall-effect current measurement device, specifically designed to be used in EMUS battery management system.
G1 Cell Module – Small type
The Small model is optimized for lower capacity cells and can be used in application with space constraints or on non-prismatic cells.
G1 Cell Module – CALB CAM 72Ah type
The CALB72 model is designed specifically for CALB CAM 72 cells (LiFePO4 chemistry).
G1 Cell Module – A/B type
The A/B model is a standard solution, designed for convenient wiring and easy installation on most medium capacity prismatic cells.
G1 Cell Module – 200-400Ah type
The 240Ah model is designed for easy installation on most prismatic cells and has spring terminal blocks for convenient communication wiring.
G1 Cell Module – 3A
The 3A model is a standard solution, designed for convenient wiring and easy installation on higher-capacity prismatic cells. This model also has a possibility to connect an additional external temperature sensor (part no. ETS02-25) for measuring the cell
G1 Cell Module – 1.5A
The 1.5A model is a standard solution, designed for convenient wiring and easy installation on most medium capacity prismatic cells.
G1 Display Unit
Emus BMS Display Unit is a device dedicated to monitor battery status and other Emus BMS activity data in real time.
G1 Smartphone Connectivity Module
Emus BMS Smartphone Connectivity Module is low energy adapter that allows to wirelessly monitor various battery parameters in real time on any Android and iOS device using Emus EVGUI app, or any PC running Windows operating system, using the usb dongle. The Smartphone Connectivity Module connects to the main controller using RS232 interface.
G1 Remote Monitoring System unit
Emus BMS Can Cell Group Modules are cell communication adapters for interfacing the main controller and separate parts of a battery pack, that enables Emus battery management system to serve large battery packs and systems of multiple cell strings connected in parallel.
+370 686 45554
On workdays 9 -18 (GMT +2)
Full installation and service support!
Call Now
Contact
Menu
