Solutions Examples

The most flexible BMS in the world

Our flexible distributed-hybrid topology BMS G1 architecture that was introduced in 2010 lets our customers assemble the system for virtually any battery application. It has been used by many satisfied customers around the world for years in electric vehicles, maritime, home and industrial energy storages and many other applications. We continue improving and expanding it every day. In Spring of 2018 We introduced brand new BMS “MINI”, which is integrated centralized topology BMS ideal for small devices applications that have up to 16 small/medium capacity cells. Still in 2018 we’ll release new generation 3 set of BMS components with further enhanced characteristics and functionalities. Centralized active balancing BMS is planned to be released by end of 2018.

Key Features of EMUS BMS

Highly flexible modular system, easy to install and maintain

Distributed BMS topology – microcomputer on each cell

Voltage and, Temperature monitoring of each cell

Electric Current monitoring of the pack

Many types of cells and battery protections

Galvanic isolation of high voltage circuits

Highly scalable – can support from few to several thousands of cells

Extensive use of CAN bus for internal and external communication

Flexible mapping of input and output digital control functions

Support of many different vendors chargers. Integration of new ones is fast and easy

Supports redundancy and hot-swap capability in master/slave configurations

Very flexible operation configuration with detailed parameters

Status, statistics, events logging and monitoring

Adaptable for various cells chemistries, types and applications

Remote Monitoring solutions via Wi-Fi/Cellular visible on online portal

Supporting PC, Android and iOS software for maintenance and monitoring

Application Configurations

Application of EMUS BMS MINI 3

BMS MINI 3 is a compact, all-in-one BMS device, that autonomously executes all core and utility functions of battery management. It interacts with all other components in the system, monitors cell voltage levels, and controls charging and balancing functions, using various inputs, outputs, and interfaces.
It is designed to use for battery packs consisting of 6 up to 16 cells connected in series and has all key BMS functions integrated into one device. One Mini 3 device can be used for a single battery pack, with the later software release there will be possibility to connect several Mini 3 devices in parallel.

Look for more details on solution example BMS MINI 3

Application of EMUS G1 CCGM Centralized

EMUS Centralized CAN Cell Group Module (also known as CCGM) is advanced cell communication adapter for interfacing main G1 control unit and a battery pack up to 16 lithium cells which enables Emus battery management system to save space by reducing the need of having cell modules as each CCGM directly monitors each battery cell. Up to 32 Centralized CAN Cell Group modules can be connected to a single control unit, having whole battery pack of up to 512 cells in series.

Look for more details on solution example G1 CENTRALIZED CCGM


Single pack simple application scenario

BMS controls one package of Lithium cells connected in series ranging from 1 to 255 Lithium cells with capacities from few up to thousands of Amp-hours each. The whole package is controlled by Control Unit which has interface to Cell Modules that are directly mounted on Lithium chemistry battery cells. Each Cell Module measures cell’s voltage and temperature and returns this information back to Control Unit via communication wire. The Cell Modules are interconnected with a single communication wire running from module to module. The first Cell Module (at the “” terminal of the pack) and last Cell Module (at the “+” of the pack) are connected to Control Unit via optical Top/Bottom Isolators which perform data interface adaption and ensure Control Unit circuit isolation from high voltages of the battery pack. Current Sensor is inserted in battery’s power line and is connected to Control Unit for charging and discharging over-current protection as well as measuring transferred charge for SOC/ SOH evaluations.

Look for more details on solution example G1 DISTRIBUTED REGULAR


In many applications the whole battery needs to be split into separate blocks or groups of cells that might be placed in different locations of vehicle or other device. Packs may be needed to be connected in series and/or parallel configurations to achieve needed battery characteristics.

In such cases EMUS BMS can be configured to use CAN Cell Group Modules instead of Top/Bottom Isolators and communication to each group performed separately via robust CAN bus link. Control Unit supports up to 32 CAN Cell Group Modules. Each CAN Cell Group Module can process up to 255 Cell Modules thus allowing whole EMUS BMS to handle up to 8160 cells.

A Display Unit may be connected to Control Unit in this or any other configuration scenario to indicate the kay battery parameters to operator or driver of vehicle.

Look for more details on solution example G1 DISTRIBUTED GROUPED


For applications requiring modularity, redundancy or hot-swap capability several EMUS BMS systems can be combined using Master/Slave of Control Unit. Many applications the whole battery needs to be split into separate blocks or battery modules that might be placed in different locations of vehicle or other device. Battery pack modules may be connected in series and/or parallel configurations to achieve needed battery characteristics.

Special model of EMUS BMS Master/Slave Control Unit with special firmware can be configured in Master / Slave configuration. The Cell Modules in each battery module may be connected to each Master/Slave Control Unit using Top/Bottom Isolators or CAN Cell Group Modules. When operating the Control Units firmware is automatically selecting the Master unit which takes care of communicating to central charger and controlling the charger process.

Please contact EMUS for solution presentation at sales@emusbms.com

Get samples and test EMUS BMS

+370 686 45554
On workdays 9 -18 (GMT +2)

Full installation and service support!