EMUS BMS Control Unit 24V – 1 pcs.
EMUS BMS USB Cable – 1pcs.
EMUS BMS COM Cable 1pcs.
EMUS BMS Ribbon Cable set 1pcs.
Emus BMS Control Unit is the the main controller in Emus battery management system, that automatically controls the battery operation process utilizing various interfaces for measurement, control, data exchange, configuration and indication.
Any lithium chemistry, series connected battery pack of up to 254 cells if using serial cell communication.
Any lithium chemistry, series connected battery pack, or pack of multiple parallel strings, of up to 8128 cells total, if using Emus Can Cell Group Modules.
Storage temp.: -40°C ÷ +95°C;
Operating temp.: –40°C ÷ +80°C;
Supply Voltage (DC): 10V ÷ 32V;
Dimensions: 97.4x30x54.5 mm;
Interfaces: CAN v2.0 A/B, USB, RS-232, Digital I/O, Analog, proprietary serial interface for cell communication;
|CU010D-T||Extended 12V control unit compatible with Toshiba SCiB|
|CU010D||Standard 12V control unit|
|CU010D-Q||Standard 12V control unit with quick start cabling kit|
|CU020E||Standard 24V control unit|
|CU020E-T||Extended 24V control unit compatible with Toshiba SCiB|
|CU020E-Q||Standard 24V control unit with quick start cabling kit|
12/10/2017Download Release Notes
What’s new in 220.127.116.11 Control Unit firmware:
Fixed bug, where master clear was not clearing passwords.
Separate firmware images by supported charger type:
Emus BMS Control Unit firmware v18.104.22.168 Analog signal controlled charger – Includes support for analog signal controlled chargers without CAN interface (e.g. TC/Elcon chargers without CAN module);
Emus BMS Control Unit firmware v22.214.171.124 Elcon – Includes support for TC/Elcon chargers with CAN interface;
Emus BMS Control Unit firmware v126.96.36.199 Eltek Valere EV – Includes support for Eltek Valere/Valeo EV chargers with CAN interface;
Emus BMS Control Unit firmware v188.8.131.52 Non CAN Charger – Includes support for simple, “ON/OFF” signal controlled charging devices without CAN interface;
Emus BMS Control Unit firmware v184.108.40.206 Powerfinn – Includes support for Powerfinn Robust and Powerfinn PAP3200 chargers with CAN interface;
Emus BMS Control Unit firmware v220.127.116.11 Zivan Q9 – Includes support for Zivan Q9 series chargers (models SG3 and SG6) with CAN interface;
Emus BMS Control Unit firmware v18.104.22.168 Zivan RE – Includes support for Zivan RE series chargers (models NG1, NG3, NG5, NG7 and NG9) with CAN interface;
28/03/2017Download Release Notes
What’s new in 22.214.171.124 Control Panel firmware:
Upon opening and later once every hour while running, the Control Panel now connects to the internet to check if there is a newer Control Unit firmware version available. If it is determined that there is a newer version, the user is notified with a system tray balloon tip.
13/02/2018Download Release Notes
What’s new in EMUS BMS Control Panel v2.4.3: