2023-11-13 11:19:54
Download Release NotesUpdates
Obsolete products removed from manual and uploaded new products versions
New Clustered naming and illustration
Chapter 3.10 wiring corrected
2021-05-13 16:18:53
Download Release NotesKnown issues:
When tabs that were dragged out of the main window are closed, the whole Control Panel can also close
Pulses per Distance Unit field is unused for now as Speed Sensor input is not functioning yet
GPI, GPO selection list not fully correct
User interface does not allow to enter high accuracy PSU divider value
Min User SoC range can be set higher than Max. Then user SoC is shown as 0% or 100%
2024-04-16 16:47:42
Download Release Notes#46 Adjusted Charging box information for inverter use
#429 Set SOC value can be entered with 2 digits after decimal point
#408 UX: removed unused parameters in SOC/SOH tab
#481 Fixed LTO voltage values switching issue
#388 Removed Auto-Connect checkbox
#431 Fixed crash during CSL022 commit
#355 Removed unused parameter in CAN tab
#369 Cleared up SOC swap functionality description in the checkbox tooltip
#468 Corrected battery parallel string voltage summary display when it's not supported
#362 Aligned warning list to protections
---
2021-09-24 17:13:51
Download Release NotesKnown issues:
Non-Clearable statistics not saved
BMS might reset during charging stages, reset period could be 1-2hrs
Wireless connectivity module only transmits data to a connected device, receiving will be added in a later firmware update
Main clock can drift and fall behind up to couple of minutes per day
Speed Sensor input is not functioning yet
No SoC PWM output functionality yet
Cell Wire Break protection deactivation delay is not as set
BMS reset needed after cell count configuration to clear wire break protection/indication
CAN Broadcast Period not accurate
Each Call Value not broadcasted
Charging restarts on max cell voltage drops below restart value
Out of boundary current is indicated as measured, not as incorrect reading
Wire break indicated correctly not in all cases
Version 2.8.4Known issues:
Wireless connectivity module only transmits data to a connected device, receiving will be added in a later firmware update
Main clock can drift and fall behind up to couple of minutes per day
Speed Sensor input is not functioning yet
No SoC PWM output functionality yet
Cell Wire Break protection deactivation delay is not as set
BMS reset needed after cell count configuration to clear wire break protection/indication
2023-07-28 17:10:57
Download Release Notes2024-04-16 16:53:57
Download Release Notes#429 Set SOC value can be entered with 2 digits after decimal point
#393 SOC improvement. When estimator is reset, SOC is ajusted to the OCV curve value
#386 Deye inverter integration
#46 New charging model for inverters (Victron, Deye, Growatt, GoodWe)
#478 Balancing logic adjustment
#351 Protection registration in events fix
#529 Lack of charge hysterisis at full SOC for NingboDeye inverter
#524 Last voltage measurement from CS030A remains after CS disconnection
2024-04-05 13:59:05
Download Release Notes2019-02-11 17:36:44
Notifications of End of Life announcement of EMUS products . For full history list of EoL notifications please press "Show all Versions" at the bottom.
Download2019-02-11 17:37:55
Notifications of EMUS products price changes. For full history list of price update notifications press "Show all Versions" at the bottom.
Download2019-10-01 08:20:57
Detailed description of G1 BMS CANopen Object Dictionary
Download2021-11-03 18:27:48
Download Release Notes2018-12-10 10:31:23
Download Release Notes2018-12-10 10:34:09
Download Release NotesOur company specialists are ready to provide technical assistance and consult in matters related with use of our products. In order to attain the best service quality, we kindly ask you to fill the contact form by clicking the button below.