2023-11-13 11:19:54
Download Release NotesUpdates
Obsolete products removed from manual and uploaded new products versions
New Clustered naming and illustration
Chapter 3.10 wiring corrected
2021-05-13 16:18:53
Download Release NotesKnown issues:
When tabs that were dragged out of the main window are closed, the whole Control Panel can also close
Pulses per Distance Unit field is unused for now as Speed Sensor input is not functioning yet
GPI, GPO selection list not fully correct
User interface does not allow to enter high accuracy PSU divider value
Min User SoC range can be set higher than Max. Then user SoC is shown as 0% or 100%
2024-04-16 16:47:42
Download Release Notes#46 Adjusted Charging box information for inverter use
#429 Set SOC value can be entered with 2 digits after decimal point
#408 UX: removed unused parameters in SOC/SOH tab
#481 Fixed LTO voltage values switching issue
#388 Removed Auto-Connect checkbox
#431 Fixed crash during CSL022 commit
#355 Removed unused parameter in CAN tab
#369 Cleared up SOC swap functionality description in the checkbox tooltip
#468 Corrected battery parallel string voltage summary display when it's not supported
#362 Aligned warning list to protections
---
2024-02-06 17:12:53
Download Release Notes#9 Added additional Negative contactor control
#207 Added CAN filter option
#115 Additional voltage measurement for redundancy. Protection added
#327 CCGM024 Support
#208 Base can id change for Isabellenhütte sensor
#388 Auto-connect feature doesn't work
#370 Negative SOH value displayed, not in 0..100 range in CAN message
#369 UX: not clear hint for SOC control
#360 UX: Wire Break detection functionality not clear
#356 UX: BMS CAN ID Base displayed not correctly in CP
##355 UX: Remove M/S related control for Non_CAN firmware
#256 Occasional crashes randomly
2023-07-28 17:03:00
Download Release Notes#RND-40 CAN device speed change issues
#RND-39 CCGM detection issue
2023-06-28 16:28:58
Download Release Notes#9256 Swap SOC/UserSOC functionality
#8969 Parallel string voltage deviation protection
#8992 Simplified estimator visual update
#NoN Added access control for the SOC buttons
#NoN Added tooltips with the external components (DU011, SCM030) names
#NoN Fixed external components (DU011, SCM030) configuration commit issues
#9686 CCGM detection issue
#9701 Master-Slave pack voltage deviation protection issue
2022-12-28 15:51:59
Download Release NotesAdded support for CAN filter device
#7819 Added a status item for the improved "Distance left" value estimation algorithm
#7892 Fixed Battery Pack ID button display
#8094 When wire break is found the individual cell voltage shown in cells tab is not accurate
2022-05-30 11:18:44
Download Release Notes#8218 Added support for new EMUS CAN devices
#7819 Added a status item for the improved "Distance left" value estimation algorithm
#7892 Fixed Battery Pack ID button display
#8094 When wire break is found the individual cell voltage shown in cells tab is not accurate
2022-02-15 18:23:43
Download Release Notes#7662 DC/DC Zero Current Control
#7782 Manual control of J1939 charger IDs. Note: Elcon name changed to J1939
#6380 Added support for LTO cells
#7734 Added support for Cell Wire Break functionality
#7892 Added new set Battery ID feature
Added new EMUS CAN devices support for CGM022 and TES011
Cell Module version now can be seen in Control Panel in Cells Tab
#7758 Fix to External Temperature Sensor Calibration
#7857 Fix to Auto Connection issue
#7770 Fix to drag'n'drop issue while configuring CCGMs/CGMs
#8094 When wire break is found the individual cell voltage shown in cells tab is not accurate
#7474 Battery Charge/Capacity not recalculated/displayed in legacy firmware
#7475 PSU input/output does not function correctly
#7484 No warning/message when password is typed in incorrectly more than 10 times
2021-06-08 14:46:41
Download Release NotesGUI improvements
COM port filtering fixed
Fix to CCGM discovery/configuration issue
Increased possible input interval for "Current in Range Control" field
Fix to excessive settings shown in Configuration Page
Battery Charge/Capacity not recalculated/displayed in legacy firmware
PSU input/output does not function correctly
No warning/message when password is typed in incorrectly more than 10 times
2021-01-05 14:07:31
Download Release NotesFixes:
Fix to discovered CGMs showing incorrect number of cells
Known issues:
Battery Charge/Capacity not recalculated/displayed in legacy firmware
PSU input/output does not function correctly
No warning/message when password is typed in incorrectly more than 10 times
Pin inversion on some pin functions
2020-12-15 17:58:34
Download Release NotesNew/Improved:
Refreshed overall look and feel of the GUI
Added more progress bars to be more informative of an ongoing process
Introduction of configurable Warnings with activation and deactivation delays
New Pin Function support
Added support for new SOC/SOH estimator algorithm
Added support for user SOC selection range, "Usable range"
Added support for Master/Slave configuration
Added support for user to select battery charging level at which charging is stopped preventing battery to reach its maximum SoC
Added option to maually choose a COM port and connect to the Control Unit
Added support for new CAN devices
Added CGMs mapping tab for manual CGM configuration
Fixes:
Communication with CAN devices (updating/cofiguration)
GUI issues
Updating Control Unit
Loading parameters to/from Control Unit
Loading SOC curve to Control Unit
Serial COM port scanning, selection fix
Known issues:
Battery Charge/Capacity not recalculated/displayed in legacy firmware
PSU input/output does not function correctly
No warning/message when password is typed in incorrectly more than 10 times
Pin inversion on some pin functions
2019-05-28 09:26:19
Download Release NotesFeatures
EMUS Centralized CAN Group Modules support
Added update and configuration support for EMUS Centralized CAN Group Modules.
Enhancements
Several additional error status reports added for update procedure.
Now when parameters which are unknown to Control Unit are requested, instead of endless polling of these parameters the cycle will break after one iteration of parameter set request.
Fixes
During CAN Group Modules configuration procedure Control Panel sometimes could crash.
During Control Unit firmware update procedure Control Panel sometimes could crash.
2019-01-17 15:25:15
Download Release Notes2018-02-13 20:34:29
Download Release Notes2017-08-25 00:04:55
Download Release Notes2017-06-19 20:21:53
Download Release Notes2017-04-21 20:16:51
Download Release Notes2017-04-07 20:14:52
Download Release Notes2021-09-24 17:13:51
Download Release NotesKnown issues:
Non-Clearable statistics not saved
BMS might reset during charging stages, reset period could be 1-2hrs
Wireless connectivity module only transmits data to a connected device, receiving will be added in a later firmware update
Main clock can drift and fall behind up to couple of minutes per day
Speed Sensor input is not functioning yet
No SoC PWM output functionality yet
Cell Wire Break protection deactivation delay is not as set
BMS reset needed after cell count configuration to clear wire break protection/indication
CAN Broadcast Period not accurate
Each Call Value not broadcasted
Charging restarts on max cell voltage drops below restart value
Out of boundary current is indicated as measured, not as incorrect reading
Wire break indicated correctly not in all cases
Version 2.8.4Known issues:
Wireless connectivity module only transmits data to a connected device, receiving will be added in a later firmware update
Main clock can drift and fall behind up to couple of minutes per day
Speed Sensor input is not functioning yet
No SoC PWM output functionality yet
Cell Wire Break protection deactivation delay is not as set
BMS reset needed after cell count configuration to clear wire break protection/indication
2023-07-28 17:10:57
Download Release Notes2024-04-16 16:53:57
Download Release Notes#429 Set SOC value can be entered with 2 digits after decimal point
#393 SOC improvement. When estimator is reset, SOC is ajusted to the OCV curve value
#386 Deye inverter integration
#46 New charging model for inverters (Victron, Deye, Growatt, GoodWe)
#478 Balancing logic adjustment
#351 Protection registration in events fix
#529 Lack of charge hysterisis at full SOC for NingboDeye inverter
#524 Last voltage measurement from CS030A remains after CS disconnection
2024-04-05 13:59:05
Download Release Notes2019-02-11 17:36:44
Notifications of End of Life announcement of EMUS products . For full history list of EoL notifications please press "Show all Versions" at the bottom.
Download2019-02-11 17:37:55
Notifications of EMUS products price changes. For full history list of price update notifications press "Show all Versions" at the bottom.
Download2019-10-01 08:20:57
Detailed description of G1 BMS CANopen Object Dictionary
Download2018-12-10 10:34:09
Download Release NotesOur company specialists are ready to provide technical assistance and consult in matters related with use of our products. In order to attain the best service quality, we kindly ask you to fill the contact form by clicking the button below.